Installation
Power Connections
Connect the ground terminal to the closest point on the chassis of the vehicle.
Keep this ground wire to less than 18" (45 cm) in length. Use 8 gauge wire
(NO CCA WIRE!!!!)
Connect the remote terminal to the remote output of head unit using 16 gauge
wire.
Connect an empty fuse holder within 18" (45 cm) of the car battery, and run 8
gauge cable from this fuse holder to the amplifier location. Then connect the
fuse holder to the "BATTERY+" (+12V) connection on the subwoofer rear
panel. Insert FUSE now.
Fig.3
FUSE
Fig.4
FUSE
Chassis
ground
point
Chassis
ground
point
to REMOTE TURN-ON
terminal of head unit
NOTE:
In this connection, the
AUTO TURN ON switch is in the
ON
position.
NOTE:
In this connection, the
AUTO TURN ON switch is in the
OFF
position.
5