Intenza Water Filter - Saeco 10002683 Operating And Maintenance Manual

INTENZA WATER FILTER

To improve the quality of the water you use, and extend the life of your machine at the same time, it is
recommended that you install the water fi lter. After installation, go to the water fi lter initialization program
(see programming). In this way, the machine informs the user when the water fi lter must be replaced.
Remove the water fi lter from its packaging, immerse it vertically (with the opening facing upwards)
in cold water and gently press its sides so as to let the air bubbles out.
1
Remove the small white fi lter
from the tank and store it in a dry
place sheltered from dust.
4
Fill the tank with fresh drinking
water and reinsert it into the
machine.
7
machine
settings
main
specials
menu
main-
tenance
energy
saving
Press "machine settings".
The machine performs the water fi lter initialization. Wait until the cycle stops automatically.
At the end of the initialization cycle, the machine returns to the product selection menu. Do not use the water
dispensed during this phase.
NOTE: if the Intenza water fi lter is not available, insert the small white fi lter previously removed (see
point 1) into the tank.
2
Set the Intenza Aroma System:
A = Light water
B = Medium water (standard)
C = Hard water
For further details see page 22.
5
Place a container beneath the
hot water spout.
8
beverage
language
settings
extras display
alerts &
clock
acoustic
settings
settings
back to
coffee go back
menu
Press "water fi lter".
water
cup
illumination fi lter
machine
water
hardness
settings
cup
rinsing
warmer
restore
back to
default
menu
settings
3
Insert the fi lter in its place within
the empty tank (see fi gure).
Press down until it clicks into
place.
6
show icon my custom
explanation coffee
Press "programming menu".
9
water
fi lter
not
inserted
restore
save
go back
default
settings
settings
Press "water fi lter activation".
7
program-
ming
menu
water fi lter
activation
inserted
back to
menu