Saeco 10002683 Operating And Maintenance Manual page 37

In order to run a descaling cycle before the machine indicates the necessity to do so, press the button "descaling
cycle" and then "start descaling" to start the descaling cycle.
descaling start
descaling
cycle
2
descaling cycle
please wait
insert the water tank
with fresh water
When the solution is fi nished the
following message appears on the
display:
5
descaling cycle
please wait
rinsing...
pause
rinsing
The machine performs the rinse cycle. At the
end of the rinse cycle fi ll the tank with fresh
drinking water. Before fi lling the tank reinsert,
if desired, the water fi lter again, or reinsert the
small white fi lter (see page 7).
1
descaling cycle
please wait
descaling...
pause
descaling
The machine begins to dispense the descaling solution through the hot
water spout. The dispensing occurs at preestablished intervals, in order to
allow the solution to be more effective.
3
Remove the water tank and rinse
with fresh drinking water to
eliminate traces of descaling
solution.
Then, refi ll with fresh drinking
water and reinsert water tank.
6
Put a container under the water spout. When the water
tank is inserted the machine automatically proceeds to
prime the water circuit. If this operation is not successful,
consult "manually priming the circuit" (see page 6)
4
descaling cycle
please wait
ciclo di risciacquo
rinsing
cycle
Rinse the machine circuits by
pressing "start rinsing".
35
start
rinsing