Makita HM1205C Technical Information page 13

R
epair
[3] ASSEMBLY/ DISASSEMBLY
[3] -5. Armature
DISASSEMBLING
(1) Separate Motor housing from Crank section. (Refer to Figs. 16 and 17.)
(2) Separate Gear housing complete from Crank section. (Refer to Fig. 18.)
(3) Remove Armature as drawn in Fig. 27.
Fig. 27
1. Remove Armature from Gear housing complete
with 1R045 and 1R346.
1R045 1R346
ASSEMBLING
Assemble Armature by reversing the disassembly procedure.
Note: Make sure that Flat washer 15 is set in place. (Refer to Fig. 17.)
Armature Gear housing
complete
2. Remove Ball bearing 6000DDW with 1R269.
1R269
Armature
Ball bearing
6000DDW
P 13/ 17
Insulation
washer