Makita HM1205C Technical Information page 10

R
epair
[3] ASSEMBLY/ DISASSEMBLY
[3] -4. Crank section (cont.)
DISASSEMBLING
(5) Separate Motor housing from Crank section as drawn in Fig. 17.
Fig. 17
1. Remove six M6x40 Hex
socket button head screws.
(6) Disassemble Crank section as drawn in Figs. 18, 19 and 20.
Fig. 18
1. Disassemble Gear housing complete
with Armature from Crank housing.
Crank housing
Gear housing
complete
Armature
2. Pry off Crank housing from
Motor housing with two 1R263.
1R263
Crank housing
Motor housing
2. Loosen four M4x18 Pan head screws
and remove Crank cap cover,
Crank cap and Seal ring.
M4x18 Pan head screw (4pcs.)
Crank cap cover
Crank cap
Note: Flat washer 15 may come off.
So, be careful not to lose it.
Crank housing
3. Filter can be removed
from Crank cap.
Filter
Crank cap
Seal ring
P 10/ 17
Flat washer 15