Installation; Starting The Machine - Saeco 10002928 Operating And Maintenance Manual

STARTING THE MACHINE

Make sure that the main power button is not pressed in the "ON" position.
1
Remove the coffee bean lid.
Fill the hopper with coffee beans.
4
Fill the tank with fresh drinking
water. Do not exceed the "max"
level indicated on the water tank.
Once fi lled, place the tank back
into the machine.
7
Press the main power button to the
"ON" position.
2
Close the lid pushing it down
completely.
5
Attach the female end of the power
cord to the machine. Insert the
male end into the power outlet
(see data tag).
The machine will automatically prime the water circuit.
The machine is now ready for use.
Water may not dispense into the container when the machine is
self-priming.
This should be considered normal.

INSTALLATION

3
Remove the water tank.
Install the water fi lter as
recommended on page 7.
6
Place a container beneath the hot
water spout.
5