Flip/Release Panel - Blaupunkt CASABLANCA CD52 Operating Instructions Manual

NOTES AND ACCESSORIES
Compact Drive MP3
As an alternative to a CD changer, you
can connect a Compact Drive MP3 to
access MP3 music tracks. If you con-
nect a Compact Drive MP3, you will first
need to use a computer to store the MP3
music tracks on the Microdrive™ hard
disk inside the Compact Drive MP3.
Then, when the Compact Drive MP3 is
connected to the car radio, you can play
the tracks like normal CD music tracks.
The Compact Drive MP3 is operated in
the same way as a CD changer. Most
of the CD changer functions can also
be used with the Compact Drive MP3.
Amplifier / sub-out
The car radio provides connections for
connecting external amplifiers and a
subwoofer.
We recommend you use well-matched
products from the Blaupunkt or Velocity
product ranges.
Interface for vehicle-specific display
and steering-wheel remote control
Some vehicles are already fitted at the
factory with a display in the dashboard
and a steering-wheel remote control.
There are specific interfaces available
for various vehicle types so that you can
use the remote control and the display
for the car radio.
You can find out for which vehicles such
an interface is available from your Blau-
punkt dealer or from the Blaupunkt tel-
ephone hotline.
34

FLIP/RELEASE PANEL

Flip/release panel
Theft protection
Your car radio is fitted with a flip/release
panel to guard against theft. Without this
panel, the unit is worthless to the thief.
Protect your unit from theft by taking the
flip/release panel with you every time
you leave the car. Do not leave the panel
behind in the car, even if it is out of sight.
The constructive design of the panel
makes for simple handling.
Note:
Do not drop the flip/release panel.
Do not expose the flip/release pan-
el to direct sunshine or other sourc-
es of heat.
Keep the flip/release panel in the
case provided.
Avoid touching the contacts of the
flip/release panel. Please clean it
when necessary with some white
spirit on a lint-free cloth.
Removing the flip/release panel
1