Panasonic Lumix DMC-LS70P Service Manual page 34

Service Manual
Diagrams and Replacement
Parts List
Digital Camera
Model No.
DMC-LS60PC DMC-LS70PC
DMC-LS60PL DMC-LS70PL
DMC-LS60EB DMC-LS70EB
DMC-LS60EE DMC-LS70EE
DMC-LS60EF DMC-LS70EG
DMC-LS60EG DMC-LS70EGM
DMC-LS60EGM DMC-LS70GC
DMC-LS60GC DMC-LS70GK
DMC-LS60GK DMC-LS70GN
DMC-LS60GN DMC-LS75P
DMC-LS70P DMC-LS75PC
Vol. 1
Colour
(S)...........Silver Type (except DMC-LS75PC)
(K)...........Black Type (only DMC-LS75P/PC/EB/EE/EF/EG/EGM)
Table of contents
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Flash Top P.C.B. .................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. Flash Top Schematic Diagram .............................................. S-5
S4.3. 6M CCD Flex Schematic Diagram ........................................ S-6
S4.4. 7M CCD Flex Schematic Diagram ........................................ S-7
S4.5. Lens Flex Schematic Diagram .............................................. S-8
S5. Print Circuit Board .................................................................... S-9
S5.1. Flash Top P.C.B. .................................................................... S-9
S5.2. 6M CCD Flex P.C.B. ............................................................ S-10
DSC0702011CE/DSC0702013CE
DMC-LS75PL
DMC-LS75EB
DMC-LS75EE
DMC-LS75EF
DMC-LS75EG
DMC-LS75EGM
DMC-LS75GC
DMC-LS75GK
DMC-LS75GN
S5.3. 7M CCD Flex P.C.B. ............................................................ S-11
S5.4. Lens Flex P.C.B. .................................................................. S-12
S6. Replacement Parts List. ......................................................... S-13
S7. Exploded View ....................................................................... S-17
S7.1. Frame and Casing Section.................................................. S-17
S7.2. Packing Parts and Accessories Section .............................. S-18
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
COMPONENTS IDENTIFIED WITH THE MARK
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as "
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
Circuit name being connected.
OFTR FEP
Name of Signal
S-1
HAVE THE SPECIAL CHARACTERISTICS
" mark.
This signal is connected
to the FEP schematic diagram.