Disassembly Procedure For The Lens - Panasonic Lumix DMC-LS70P Service Manual

8.4. Disassembly Procedure for the
Lens
NOTE: When Disassembling and Assembling for the Lens
1. To minimize the possibility of the CCD being dirt, perform
disassemble and/or assemble under the condition of the
CCD is being mounted.
Disassembling procedures for the CCD unit, refer to item
8.6.
2. Take care that the dust and dirt are not entered into the
lens.
In case of the dust is putted on the lens, blow off them by
airbrush.
3. Do not touch the surface of lens.
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease to the point where is shown to" Grease
apply" in the figure.
8.4.1. Removal of the Zoom Motor Unit,
Direct Frame/Drive Frame Unit and
1st Lens Frame/2nd Lens Frame
Unit
1. Remove the 2 locks.
2. Unscrew the 5 screws (A).
3. Turn the zoom motor unit to the indicated by arrow.
4. Remove the cover to the indicated by arrow.
5. Move the master frange unit to the indicated by arrow.
25