Accessories; Bus Connection - Pepperl+Fuchs LB Series Manual

LB Remote I/O System
Product Specifications
2.6

Accessories

2.6.1

Bus Connection

The following accessories are available for bus connections.
The service bus connection is provided via a 9-pin sub-D connector for all backplanes. The
way in which the fieldbus is connected depends on the bus system.
Bus system
PROFIBUS DP/DP-V1
MODBUS RTU
FOUNDATION fieldbus H1
MODBUS TCP
LB9001A
Cable inlet at 35

With connectible terminator

With connection for a bus monitor or a class 2 master

Figure 2.13
LB9002A
Axial cable inlet

With connectible terminator

Figure 2.14
35.5
35
58
Dimensions of the LB9001A
20
ON OFF
31.5
Dimensions of the LB9002A
Fieldbus connection
9-pin sub-D connector
RJ-45 socket
16.6
17
15