Toro Groundsmaster 7210 Service Manual page 145

Disassembling the Transmission (continued)
Groundsmaster 7210
16222SL Rev C
46. Remove the retaining ring that secures the input shaft oil seal into the gear
case housing bore, and remove the spacer and oil seal from the housing.
Discard the seal.
Note: Ensure that you do not damage the seal bore in the housing.
g033439
1. Input shaft
2. Right pump shaft
47. Remove the input shaft, right pump shaft, and left pump shaft assemblies
from transmission pump housing.
48. Slide the pipe assembly from the bore of the pump housing.
49. Remove and discard the 2 O-rings from the grooves in the pipe.
Figure 79
3. Left pump shaft
4. Pipe
Page 4–85 Hydraulic System: Service and Repairs