One-Touch Recording - Philips VRZ342AT99 Owner's Manual

VRZ342comb.QX33 4/7/99 10:06 PM

34 One-Touch Recording

The One-Touch Recording feature allows you to set an immediate
timed recording 30 minutes to eight hours long. Before you begin:
Set up the channels at the VCR.
Select a recording speed (SP, LP, SLP) with the SPEED button.
Put a tape in the VCR. Make sure the tape's record tab is intact
and the tape is long enough to record the program(s).
Place the VCR in VCR position. (The VCR light will appear on
the display panel. If it does not, press the VCR/TV button once.)
1
Press the VCR button.
2
Press the CH(annel) o/p buttons or the Number buttons
to select the channel you want to record.
3
Press the REC(ord)/OTR button repeatedly until the
desired recording length (30 minutes to eight hours)
appears on-screen. Recording will begin immediately. The
REC(ord) light and the Timer light will appear on the display
panel.
OTR (0:30)
CH12
4
To stop an OTR before recording is finished, press the
STOP/p button or the POWER button.
To cancel the OTR but continue recording, press the
REC(ord)/OTR button repeatedly until REC appears in the upper
left corner of the TV screen. (STATUS must be set to ON. See
page 27 for details.) The REC light will remain on the display panel
of the VCR, but the Timer light will disappear.
Page 34
4
POWER EJECT
VCR/TV SPEED MEMORY
REC/OTR PAUSE/STILL
PLAY
REW F.FWD
STOP
STATUS/EXIT
1 2 3
CH.
4 5 6
7 8 9
0
MUTE +100
VOL.
1
VCR TV CBL/DBS
VCR PLUS+
/ENTER
VAR.SLOW SLOW
TRACKING F.ADV X2 PLAY
QUICK TIME INDEX REC END SKIP
SEARCH
Helpful Hints
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired length appears on-screen.
• If you begin an OTR when another
recording is paused, the OTR will
begin.
• You can not pause an OTR.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority. The timer
recording will not take place.
• If the end of the tape is reached
during a One-Touch Recording, the
VCR will eject the tape and turn
itself off.
3
2