On-Screen Status Displays - Philips CCZ130AT99 Owner's Manual

CCZ130comb 4/5/99 7:32 PM

26 On-Screen Status Displays

A status display will appear when you press the STATUS/EXIT
button or certain function buttons. The contents of the status dis-
play will vary. To choose the status display mode, follow the steps
below.
If you select STATUS ON, then select COUNTER ONLY
OFF:
Whenever you press the STOP/p button or the PLAY/o but-
ton, the status display will appear for five seconds.
If you select STATUS ON, then select COUNTER ONLY
ON:
Whenever you press the PLAY/o button, the status display will
appear for five seconds. After five seconds, only the counter will
remain on-screen.
If you select STATUS OFF:
The status display will not appear when you press function but-
tons. You must press the STATUS/EXIT button to see the sta-
tus display.
1
Press the MENU button.
2
Press the PLAY/
VCR SETUP, then press the FF/SEARCH B button.
3
Press the PLAY/
ON-SCREEN MODE, then press the FF/SEARCH B but-
ton.
4
Press the PLAY/o button or the STOP/p button to select
STATUS, then press the FF/SEARCH B button so that
ON or OFF appears beside STATUS.
ON-SCREEN MODE
STATUS [ON]
>
COUNTER ONLY [OFF]
SELECT KL CHOOSE B
TO END PRESS EXIT
5
If you set STATUS to OFF, go to step 6. If you set STA-
TUS to ON, press the PLAY/o button or the STOP/p
button to select COUNTER ONLY, then press the
FF/SEARCH B button so that ON or OFF appears beside
it.
6
Press the STATUS/EXIT button.
Page 26
button or the STOP/ button to select
button or the STOP/ button to select
Function
Button
Channel
Pressed
Time
12:00 AM STOP
CH10
SLP M 1:23:45
Tape Counter
and
Speed
Counter
Memory
Helpful Hints
• If the channel you select has no
broadcast, the screen will be solid
blue.
• You cannot view closed captions
during recording or tape playback if
COUNTER ONLY is set to ON.
Details are on pages 38 - 39.