Timer Recording - Philips CCZ130AT99 Owner's Manual

CCZ130comb 4/5/99 7:32 PM

32 Timer Recording

Follow the steps below to program the TV/VCR to record TV
programs while you're away from home. The TV/VCR will turn
itself on, record, and turn itself off automatically. Before you begin,
make sure:
The clock is set. If not, CLOCK MUST BE SET appears.
Channels are set up.
There is a tape in the TV/VCR. (Make sure the tape's record
tab is intact and the tape is long enough to record the pro-
gram.)
Complete each step within 60 seconds of completing the
previous step. If you don't, you may start again at step 1.
1
Press the MENU button.
PRESS
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
2
Press the PLAY/
VCR PROGRAM, then press the FF/SEARCH B button.
VCR PROGRAM
> ONCE
DAILY(MON-FRI)
WEEKLY
PROGRAM REVIEW
SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/
a ONCE, DAILY, OR WEEKLY recording. Then, press
the FF/SEARCH B button.
ONCE: The TV/VCR will record a TV program on any day you
choose, up to 12 months away.
DAILY: The TV/VCR will record every day from Monday to
Friday – starting at the same time and recording the same channel
for the same length of time.
WEEKLY: The TV/VCR will record the same channel on the
same day, at the same time, and for the same length of time
every week.
DAILY PROGRAM (MON-FRI)
Daily
Recording
(example)
SELECT PROGRAM NUMBER
TO END PRESS EXIT
Page 32
B
button or the STOP/
button or the STOP/
PROGRAM -1 2 3 4 5 6 7 8-
1
button to select
button to select
• If the power fails, programmed
timer recordings will be restored
when the clock is reset. (The clock
will reset itself automatically if you
are using the AUTO CLOCK feature.
Details are on pages 14 - 17. If
you are not using the AUTO CLOCK
feature, reset the clock manually.
Details are on pages 12 - 13.) The
timer recording will not occur only if
the timer recording was scheduled
to take place during the power fail-
ure.
• You cannot set a timer recording if
RECORD DEFEAT is set to ON.
Details are on page 36.
POWER MENU STATUS/EXIT CLEAR
1 2 3
MEMORY
4 5 6
CHANNEL
7 8 9
0 +100
ALT.CH
SLEEP
VOLUME MUTE
SPEED
REW/SEARCH PLAY/ FF/SEARCH
STOP/
REC/OTR PAUSE/STILL
2-3
Helpful Hints