Timer Recording - Philips CCZ130AT99 Owner's Manual

CCZ130comb 4/5/99 7:32 PM
Checking or Clearing Timer Recordings
1
With the TV/VCR on, press the MENU button.
2
Press the PLAY/
VCR PROGRAM, then press the FF/SEARCH B button.
3
Press the PLAY/
GRAM REVIEW, then press the FF/SEARCH B button.
The timer recording information for the program in the lowest
numbered position will appear on-screen. If no timer recordings
are programmed, nothing will happen when you select PROGRAM
REVIEW.
4
Press the FF/SEARCH B button to display information
about the next programmed timer recording. (If you do
not press a button within 10 seconds, information about the next
programmed timer recording will appear.) This will continue until
all positions have been displayed. Then, the menu will disappear.
You can exit the Program Review at any time by pressing the
STATUS/EXIT button.
5
To cancel the timer recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
6
Repeat steps 1 - 4 to make sure you have cleared the
correct position.
Page 35
button or the STOP/ button to select
button or the STOP/ to select PRO-
Timer Recording (cont'd) 35
1
POWER MENU STATUS/EXIT
1 2 3
4 5 6
7 8 9
0 +100
VOLUME MUTE
REW/SEARCH PLAY/
REC/OTR STOP/
2-3
5
CLEAR
MEMORY
CHANNEL
ALT.CH
SLEEP
SPEED
4
FF/SEARCH
PAUSE/STILL