Automatic Channel Setup - Philips CCZ130AT99 Owner's Manual

CCZ130comb 4/5/99 7:32 PM

10 Automatic Channel Setup

Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following the steps below.
1
Press the MENU button.
TO ADJUST PRESS { / B
INPUT CABLE
>
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
2
Press the PLAY/
INPUT. Press the REW(ind)/SEARCH { button or the
FF/SEARCH B button until ANTENNA or CABLE
(whichever you have) appears beside INPUT.
TO ADJUST PRESS { / B
INPUT CABLE
>
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
3
Press the STOP/
SETUP, then press the FF/SEARCH B button.
PRIMARY SETUP
SELECT LANGUAGE
>
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
SELECT KL CHOOSE B
TO END PRESS EXIT
4
Press the PLAY/
AUTO PROGRAMMING, then press the FF/SEARCH B
button. AUTO PROGRAMMING MEMORIZED CH ... will
appear on-screen. The TV/VCR will memorize all available chan-
nels.
5
Wait for a few minutes. When setup is complete, CHANNELS
ARE SET will appear on-screen. Then the programming of the
lowest channel number placed in the TV/VCR's memory will
appear on-screen. Now, when you press the CHANNEL o/p
buttons, you will scan only through channels you receive.
Page 10
button or the STOP/ button to select
button repeatedly to select PRIM.
button or the STOP/ button to select
5 Wait for the TV/VCR to set up
channels.
1
POWER MENU STATUS/EXIT CLEAR
1 2 3
MEMORY
4 5 6
CHANNEL
7 8 9
0 +100
ALT.CH
SLEEP
VOLUME MUTE
SPEED
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR STOP/ PAUSE/STILL
2&4
Helpful Hints
• Line Input mode will always be
stored in the TV/VCR's memory as
channel 00. You cannot delete it.
• You cannot program channels when
the TV/VCR is on channel 00 (A/V
INPUT will appear beside INPUT at
step 2). Select ANTENNA or CABLE
at step 2.
3