Table of Contents
Advertisement
26 On-Screen Status D isplays
A status display will appear when you press the STATUS/EXIT but-
ton or certain function buttons.The contents of the status dis-
play will vary.To choose the status display mode, follow the
steps below.
If you select STATUS ON, then select COUNTER
ONLY
OFF:
Whenever you press the STOP/v button or the PLAY/A but-
ton, the status display will appear for five seconds. Portions of
the status display also may appear when you press other func-
tion buttons.
If you select STATUS ON, then select COUNTER
ONLY
ON:
Whenever you press the PLAY/A button, the status display will
appear for five seconds.After five seconds, only the counter will
remain on the screen. Portions of the status display also may
appear when you press other function buttons.
If you select STATUS OFF:
The status display will not appear when you press function but-
tons.You must press the STATUS/EXIT button to see the status
d_,olay.
!
Press the MENU button.
Current
Channel
Tape
Time
Function
Jo 1
12:00 AM
S
CHI0
M 1:23:45
I
"1-__e
Counter
Speed
and
Counter
Memory
2
Press the PLAY/& button or the STOP/V
button to select
VCR SETUP, then press the F.FWD/I_
button.
3
Press the PLAY/A button or the STOP/V
button to select
ON-SCREEN
MODE, then press the F.FWD/I_
button.
4
Press the PLAY/A button or the STOP/v
button to select
STATUS, then press the F.FWD/_
button so that ON or
OFF appears beside STATUS.
> STATUS
[ON]
COUNTER
ONLY
[OFF]
SELECT AY CHOOSE _"
O END
PRESS EXIT
5
If you set STATUS to OFF, go to step 6. If you set STATUS
to ON, press the PLAY/_
button or the STOP/_
button
to select COUNTER
ONLY, then press the F.FWD/I_
but-
ton so that ON or OFF appears beside it.
6
Press the STATUS/EXIT
button.
Helpful Hint
• You cannot view closed captions dur-
ing recording or tape playback if
COUNTER ONLY is set to ON.
Details are an pages 49-50.
I
Advertisement
Table of Contents
