JRC JSS-2150 Instruction Manual page 158

Specifications
(3) Battery charger (NBB-724)
Source voltage
Current consumption
Charging current
Charging circuit/ characteristic
Functions
Alarm type
Temperature range for full performance
Operating temperature range
Storage temperature range
Humidity resistance
Vibration resistance (3 axes)
(4) Printer (NKG-91)
Printing system
Communication interface
Data control
Data buffer
Maximum print speed
Roll paper width
Power supply voltage
Current consumption
(5) Printer (DPU-414)
Printing system
Communication interface
Data control
Data buffer
Maximum print speed
Roll paper width
Power voltage
Current consumption
9-6
90 VAC to 132 VAC or 180 VAC to 264 VAC (50/60 Hz)
Charging
Discharging
Maximum 22 A (Common to Floating & Equalizing charge)
Floating charge and equalizing charge
18 VDC or more: Constant voltage or current characteristic
Less than 18 VDC: Reduced current characteristic*
(*) Foldback current limiting characteristic
Overvoltage input protection, Reverse polarity protection,
Dimmer lamp, Float/Equal changing, DC ope, Batt temp
Batt low/high voltage, Internal temperature,
Other abnormal charging
-15°C - +55°C
-15°C - +55°C
-25°C - +65°C
No abnormality after standing 10 hours in +40°C, 93% RH
2 Hz - 5 Hz to 13.2 Hz:
13.2 Hz to 100 Hz:
No abnormality after testing resonance points or at 30 Hz
for more than 2 hours
Thermal line dot
RS-232C, 4.8/9.6/38.4 kbps
RTS/CTS
4096 byte
20 mm/sec or more
58 mm
6.5 VDC (5 VDC to 8.7 VDC)
Maximum 2 A
Thermal serial dot
RS-232C, 4.8k/9.6k/38.4 kbps
HW busy
About 28 Kbyte
52.5 cps
112 mm
6.5 VDC
Maximum 2 A
: 15 A or less (100 VAC input)
8 A or less (220 VAC input)
: 0.5 A or less (at 24 VDC ope)
: Full amplitude ±1 mm±10%
: Maximum acceleration
2
m/s fixed
7