Setup - CDP 7000 Operation Manual

user's nose and press the
once the analysis has concluded. Since a precise result requires actual exhaled air,
passive tests should be approximate and provisional conclusions. These tests
should not be considered definitive in a formal inspection.
Important: After carrying out a test, you may press any button to return to the test
menu, you can also program the "test result display time". This parameter will
allow you to set how long the test results will be displayed on the screen before
automatically returning to the test menu to continue performing controls. If the
person that takes the test is appears very drunk, we recommend that you allow
clean air into the blowing tube in order to eliminate possible residuals from
previous alcohol tests, allowing more precise subsequent tests.

6. SETUP

In the main menu, press the right button
This submenu includes:
CALIBRATION DATE reminder
DATE setup
TIME setup
MEASUREMENT UNIT setup
ALARM setup
BLOWING TIME setup
RESULT TIME setup
Select any category by pressing the left button
the next category.
button. The screen will show the result of the test
to display the menu.
, then press the right button
5
to go to