Related Manuals for CDP 7000
Summary of Contents for CDP 7000
- Page 1 CDP 7000 FAST SCREENING ALCOHOL TESTER OPERATION MANUAL PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE TESTER Content Catalogue...
-
Page 2: Table Of Contents
1. INTRODUCTION…………………….………………………………………………..……1 2. ACCESORIES…………………………….………………………………………….…… 1 3. STRUCTURE………..………………………………………………………………..……2 3.1 APPEARANCE…………………………………………………………….….….2 3.2 DISPLAY……………………………………………………...……………….…..2 4. POWER ON/OFF BUTTON.…………………………….……….………………..………3 4.1. POWER ON ……..……………………………….………………………..……..3 4.2. POWER OFF……………………………………………………………..………3 4.2.1 Manual power off..……………………………………..………………...3 4.2.2 Power saving………………………………………..………….………..3 4.2.3 Low battery..…………………………………….……………..…………3 5. TESTING………………..…..…………………………………………………..….……….4 6. SETUP…………….………………………………………………………………….…….5 6.1. Calibration reminder.. …………………………………….……………..………6 6.2. -
Page 3: Introduction
You will be able to check, with great precision and speed, the alcohol concentration level on a user’s breath. The CDP 7000 breath tester presents a compact keyboard and an intuitive and easy-to-use menu that makes it precise and practical. -
Page 4: Structure
3. STRUCTURE 3.1 Appearance Fig. 1 Blowing Sling Head lamp nozzle Screen USB Port (reserved) Alarm lamp Keyboard Battery cover 3.2 Display Fig. 2... -
Page 5: Power On/Off Button
4. POWER ON/OFF BUTTON 4.1 Power On Press the button during 1 second; the system will automatically begin the self-check process. After emitting an alarm beep, the display will show the breath tester model and version. The main menu will appear once the self-check concludes. (See chart 2). -
Page 6: Testing
The battery icons indicate: Table 1. Full battery Low battery Battery partly consumed Battery shortage, please change or recharge the batteries. 5. TESTING When the breathalyzer is turned on, the screen will show the main menu (see Fig. 2). Take a deep breath and then blow into the tester through the blowing nozzle, smoothly and evenly until the buzzer stops and you hear a “pop”... -
Page 7: Setup
user’s nose and press the button. The screen will show the result of the test once the analysis has concluded. Since a precise result requires actual exhaled air, passive tests should be approximate and provisional conclusions. These tests should not be considered definitive in a formal inspection. Important: After carrying out a test, you may press any button to return to the test menu, you can also program the “test result display time”. -
Page 8: Calibration Reminder
6.1. CALIBRATION DATE reminder In this menu, you may see the days left until the next recommended calibration. 6.2. DATE-TIME setup In the date-time setup menu, press the left button to choose the category. The item selected will appear in blue. Then press the right button to change the value. -
Page 9: Test Result Display Time
The distance between the user's mouth and the blowing opening should be less than 3 cm during the test, so the air is not diluted and the result will be more exact. 6.5 TEST RESULT DISPLAY TIME setup The display time is how long the result will appear on the screen. To improve the performance and efficiency of the breathalyzer, the result will be shown during a brief period of time (which may be modified). -
Page 10: Main Techincal Indexes And Parameters
You may now save the new setup. Press to exit this menu. 8. MAIN TECHNICAL INDEXES AND PARAMETERS Table 3. Model CDP 7000 Sensor type Fuel-cell alcohol sensor Measurement range 0～2.000mg/L（0～440mg/100ml） Warm-up time... - Page 11 If you require technical support (warranty and operation questions), please contact the CDP Customer Service Department at 34-902104060 or visit our website: www.cdpsa.com where you will find further guidelines and instructions.
- Page 12 CONTACT DATA C.D.Products S.A. Polígono Industrial P-29. 28400 Collado Villalba – Madrid. www.cdpsa.es Customer service hotline: 902 10 40 60 Email: clientes@cdpsa.es Fax: 91 851 71 60...