Table of Contents
Advertisement
5. Adjust the paper width slider to the card width. The paper width slider should be
gently touching both sides of the card.
Attention
S
D
CANNING
There are 4 different ways to operate the scanner:
1. By acquiring images from the scanner through our TWAIN interface within any
TWAIN-compliant application programs.
2. By scanning from the buttons on the scanner front panel.
3. By scanning from DocAction's Execute menu on the screen.
4. By scanning from the icon in the left side of the DocAction window.
The TWAIN interface and DocAction software are automatically installed to your
system along with the scanner driver.
Attention
Scanning via TWAIN Interface
The TWAIN program is a very important piece of software that comes with your
scanner. This program acts as an interface between the scanner hardware and the
image-editing software you are using to view and edit images. The TWAIN program
allows you to adjust a number of settings to define the quality of the scanned image.
The following describes how you may use our bundled business card recognition
software (NewSoft Presto! BizCard) to scan via TWAIN interface. When you get
familiar with the scanning, you may alternatively use other TWAIN compatible
scanning program or image-editing application to do your scanning projects.
Information
Make sure the plastic cards you wish to scan
are horizontally loaded into the ADF.
Maximum thickness of each plastic card is 1.2
mm.
OCUMENTS
Before you start scanning, check the following:
The power of both your computer and
scanner is turned on.
The icon
system tray.
Paper is appropriately loaded into the ADF.
The availability of the bundled application
programs may vary depending on the scanner
model you purchase.
appears on the Windows
22
Advertisement
Table of Contents
