Download Print this page
D-Link DWL-P100 Quick Installation Manual

D-Link DWL-P100 Quick Installation Manual

Power over ethernet adapters
Hide thumbs Also See for DWL-P100:

Advertisement

Quick Links

Warning
Warning: Please follow the
Warning
: Please follow the
: Please follow the
: Please follow the
Warning
Warning
: Please follow the
instructions in this guide
instructions in this guide
instructions in this guide
instructions in this guide
instructions in this guide
carefully. Connecting these
carefully. Connecting these
carefully. Connecting these
carefully. Connecting these
carefully. Connecting these
adapters incorrectly may result in
adapters incorrectly may result in
adapters incorrectly may result in
adapters incorrectly may result in
adapters incorrectly may result in
damage to you network devices.
damage to you network devices.
damage to you network devices.
damage to you network devices.
damage to you network devices.
About Power Over Ethernet.
About Power Over Ethernet.
About Power Over Ethernet.
About Power Over Ethernet.
About Power Over Ethernet.
The DWL-P100 Power Over Ethernet (POE) Adapters are designed to supply
operational power to a Wireless Access Point. These adapters eliminate the need to
use an additional AC/DC power supply at the Access Point giving you the ability to
mount an Access Point virtually anywhere in a building where power outlets are not
available, ( for example in, ceilings, attics). D-Link's DWL-P100 Adapters take
advantage of the unused cable pairs within Ethernet Cat 5 cabling. The Base Unit
inserts DC voltage into the unused wires therefore allowing the single Category 5 cable
to carry both Ethernet data and DC power to an Access Point. The POE Terminal Unit
splits the data and DC power apart, which is then supplied to the Access Point.
Check Your Package Contents
Check Your Package Contents
Check Your Package Contents
Check Your Package Contents
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DWL-P100.12232002
DWL-P100 Base Unit and Terminal Unit
Ethernet (CAT5 UTP/Straight Through) Cable
Female-to-Female Power Connector
48V DC Power Adapter
DWL-P100
DWL-P100
DWL-P100
DWL-P100
DWL-P100
Power Over
Power Over
Power Over
Power Over
Power Over
Ethernet Adapters
Ethernet Adapters
Ethernet Adapters
Ethernet Adapters
Ethernet Adapters
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.

Advertisement

loading

Summary of Contents for D-Link DWL-P100

  • Page 1 If any of the above items are missing, please contact your reseller. ©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-P100.12232002...
  • Page 2: Terminal Unit

    Connecting The DWL-P100 Connecting The DWL-P100 Connecting The DWL-P100 Connecting The DWL-P100 Connecting The DWL-P100 Base Unit Base Unit Base Unit Base Unit Base Unit Power In: using the supplied 48V power supply, connect to a wall power outlet. P + Data Out: provides the...
  • Page 3 Do Not mistake the “LAN IN” port with the “P + DATA OUT” port. Incorrectly plugging the wrong Ethernet cable into the wrong Ethernet port may cause serious damage to your network devices. D-Link will not replace or repair products or reimburse customers for devices that become damaged due to incorrect installation, nor is liable for any loss of business resulting in the incorrect installation of this product.
  • Page 4 Connecting The DWL-P100 Connecting The DWL-P100 Connecting The DWL-P100 Connecting The DWL-P100 Connecting The DWL-P100 Connect another Cat 5 Ethernet cable from the Base Unit “P + DATA OUT” to the “LAN IN” of the Terminal Unit. Only use a CAT 5 Ethernet straight-through cable.
  • Page 5 Connecting The DWL-P100 Connecting The DWL-P100 Connecting The DWL-P100 Connecting The DWL-P100 Connecting The DWL-P100 Connect the provided Cat 5 Ethernet cable from the Terminal Unit “LAN OUT” to the RJ-45 LAN port of the Wireless Access Point. At this point, your Wireless Access Point should have power and...
  • Page 6: Specifications

    Specifications Category 5 Pin Usage . Data: 1, 2, 3, 6 . Power: 4, 5, 7, 8 Voltage . Input: 48VDC, 400mA . Output: 5VDC, 2.5A DWL-P100 Power Over Ethernet (Base Unit) Ethernet DWL-P100 . Connector: RJ-45 Power Over Ethernet (Terminal Unit) .
  • Page 7: Technical Support

    Technical Support Technical Support Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product.