D-Link DWL-P200 Specifications

DWL-P200

Power over Ethernet

D-Link, an industry leader in networking, introduces
the DWL-P200 Power over Ethernet (PoE) Adapter.
The DWL-P200 delivers both data and electrical
power to Ethernet-enabled devices using a single
Ethernet cable. Using Power over Ethernet, you
eliminate the need to place an Ethernet-enabled
device, such as a wireless access point, near a
power outlet, giving you more freedom in placement.
The DWL-P200 is simple to install, requiring no
tools and no software. Its compact size makes
implementation of the DWL-P200 easy. Plug the
base unit into a power outlet, and then connect
the terminal unit to your network device using
any standard Ethernet cable. Once set up, the
terminal device unit can output power
compatible 5V or 12V Ethernet-enabled device.
Deliver Power over Ethernet
Transmit Power up to
328 Feet (100m)
Plug & Play Installation
Adjustable Output Power
Simplifies Your
Ethernet-enabled
Device Installation
The DWL-P200 simplifies your installation of
Ethernet-enabled devices, such as an Internet
camera or wireless access points, by allowing
you to place it beyond the range of standard
power outlets. You can now mount these devices
to a ceiling or outside without placing them near
a power supply.
With the DWL-P200, both power and data can be
transmitted up to 328 feet (100m) using standard
Ethernet cabling with virtually no reduction
in data throughput. Use the DWL-P200 with
Ethernet-enabled devices where power outlets
are not readily available.
to any
2
to Remote Devices
1