Terminal Unit - D-Link DWL-P100 Quick Installation Manual

Connecting The DWL-P100 Connecting The DWL-P100
Connecting The DWL-P100
Connecting The DWL-P100 Connecting The DWL-P100
Power In: using the
supplied 48V power
supply, connect to a
wall power outlet.
DC In: supplies 5V 2.5
amps of power. Using the
included power cable,
connect to your Ethernet
enabled device's power.
Base Unit Base Unit
Base Unit Base Unit Base Unit
Data In: connect an RJ-45
straight-through cable to
your computer or switch.

Terminal Unit

Terminal Unit
Terminal Unit Terminal Unit Terminal Unit
LAN Out: connect a
CAT 5 RJ-45 straight-
through cable to an
Ethernet enabled device.
P + Data Out: provides the
data and power to the terminal
unit. Connect this port to the
LAN In on the Terminal unit.
LAN In: connect a CAT 5
RJ-45 straight-through
cable from the P + Data
Out port on the Base Unit.