Advertisement
Wa r n i n g : P l e a s e f o l l o w t h e
instructions in this guide carefully.
C o n n e c t i n g t h e s e a d a p t e r s
incorrectly may result in damage
to you network devices.
About DWL-P50
The DWL-P50 Power Over Ethernet (POE) Adapters are designed to work with
D-Link PoE switches to deliver power over Ethernet to D-Link wireless Access
Point, IP Camera and IP phone, which didn't support PoE. This allows you to place
those D-Link devices virtually anywhere in a building where power outlets are not
available. DWL-P50 Unit splits the data and DC power apart form D-Link PoE switch
and then supplies them to D-Link wireless Access Point, IP Camera and IP phone.
(Please refer appendix A for DWL-P50 compatibility with D-Link products )
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software
and specifications subject to change without notice.
DWL-P50 Power Over Ethernet Adapter
Ethernet (CAT5 UTP/Straight Through) Cable
Female-to-Female Power Connector
1
DWL-P50
Power Over
Ethernet Adapters
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for D-Link DWL-P50
Summary of Contents for D-Link DWL-P50
- Page 1 Female-to-Female Power Connector If any of the above items are missing, please contact your reseller. ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice.
- Page 2 Connecting The DWL-P50 P+DATA IN:connect a CAT Voltage Selector:used to 5 RJ-45 straight- through select DC 5V (11.5W) or cable from PoE switch. 12V (12W) LAN OUT:connect a CAT DC OUT:supplies 5V or 5 RJ-45 straight- through 12V of power. Using the...
- Page 3 Connecting The DWL-P50 Connect a Cat 5 Ethernet cable from the PoE port of switch (For example: 1~8 port of D-Link DES-1316) to the “P+DATA IN” of DWL-P50 Use a CAT 5, 5e, or 6 UTP/STP straight-through Ethernet cable Select voltage that your device requires before connect power cable to power receptor.
- Page 4 Network Device. The Power LED of the Network Device should light up. Connect the provided Cat 5 Ethernet cable from DWL-P50 “LAN OUT” to the RJ-45 LAN port of the Network Device. Installation is complete! Your Network Device should have power and...
- Page 5 . IEEE 802.3af compatible. . Optional output 5VDC or 12VDC. . No Software Required and Operating System Independent. Work with D-Link PoE switches DES-1316 to provide Wireless AP, Internet Camera, IP Phone or Equivalent 5VDC or 12VDC System. Specifications . Voltage .
-
Page 6: Technical Support
Technical Support You can find software updates and user documentation on the D-Link websites. If you require product support, we encourage you to browse our FAQ section on the Web Site before contacting the Support line. We have many FAQ’s which we hope will provide you a speedy resolution for your problem.
Need help?
Do you have a question about the DWL-P50 and is the answer not in the manual?
Questions and answers