Disassembly; Overview - Sony Ericsson P1c Working Instructions

Working Instruction, Mechanical

2 Disassembly

When you are going to replace a part being listed in Replacements, the instruction of that section
usually begins by directing you to this Disassembly section with a specification of the instructions you
have to carry out in order to disassemble the phone as far as needed before returning to
Replacements for the actual replacement.
REPLACEMENTS
Contents
Start
page
REASSEMBLY
DISASSEMBLY
Done

2.1 Overview

The disassembly is done in the following sequence:
1. Battery Lid – A, and Battery - B
2. Antenna lid
3. Front
4. Keyboard A and Keyboard support, B
5. Keyboard flex
6. LCD
7. PCBA
8. Frame (with sub PCBA)
3/000 21-1/FEA 209 544/126 A Approved according to FEA matrix doc number
©
Company Internal Sony Ericsson Mobile Communications AB