Working Instruction, Mechanical
4.1.6 Antenna Lid
Place the Antenna lid onto the frame and snap together with
the frame. Start at the top end.
Make sure that there is no gap between the two half's -
Visually inspect all around the unit.
±
A
11
2,0
PPLY
NCM
NCM OF TORQUE FOR THE SCREW USING
NTZ 112 1052 (JCIS BIT)!
Assemble and tighten the three screws in the Frame.
Replace the screw if it's damaged otherwise it can be
reused.
Assemble the External antenna cap.
Assemble the Stylus pen.
3/000 21-1/FEA 209 544/126 A
Approved according to FEA matrix doc number
©
Company Internal
Sony Ericsson Mobile Communications AB