Label - Sony Ericsson P1c Working Instructions

Working Instruction, Mechanical
INSTALLATION
±
A 2,0
PPLY 17 NCM NCM OF TORQUE FOR THE SCREW USING
NTZ 112 288 ( BIT )!
TORX
Place the Sub pcba in the frame.
Assemble and tighten the two screws in the Frame.
Follow the 4.1.1 – 4.1.6 Reassembly instructions!

3.34 Label

REMOVAL
Follow the 2.1.1 Disassembly instructions!
Read the old label and/or write the information into the
"Label make" program before removal
Note the position of the label before removal
Heat up the label by using hot air, if needed.
Carefully remove the label without causing scratches
If there still are residues, clean the surface with isopropyl
alcohol.
3/000 21-1/FEA 209 544/126 A 56(68)
©
Sony Ericsson Mobile Communications AB