Installation; Preliminary Installation Measures - Riello Condexa PRO Series Installation, Technical And Maintenance Manual

INSTALLATION

2 INSTALLATION
2.1

Preliminary installation measures

1
2 modules
To correctly install the modules, the installer must take into consideration a series of tolerances on the installation distances as
established during the design stage.
In particular:
1 the plates for securing the frames have slots and must only be secured after having fitted the manifolds.
2 if making connections between manifolds, tighten the flange to ensure that the seal adheres and reduce the clearance on
the total length of the manifolds.
3 the thermal module can slide (right-left) on the supporting bracket to facilitate any adjustments which need to be made
during the installation stage of the hydraulic ramps.
4 in the case of installations with a manifold for 3 modules, the central frame has a greater tolerance.
3
4
2
3 modules
20