Graco Reactor A-25 Instructions Manual page 63

Reactor A-XP1 Plural Component Proportioner
Maximum Fluid Working Pressure
Maximum Air Supply Pressure
Maximum Air Working Pressure
Pressure Ratio
Air consumption
Machine Maximum Power with hose
Amperage Requirement (Full Load Peak)*
Maximum Heater Fluid Temperature
Maximum Hose Fluid Temperature
Maximum Ambient Temperature
Maximum Output
Output Per Cycle (A and B)
Heater Power
Hose Power
Sound Pressure (see NXT air motor manual)
Sound Power (see NXT air motor manual)
Viscosity Range
Maximum Fluid Inlet Pressure
Fluid Inlet/Strainer Filter
Air inlet Filter Mesh
Component B (Resin) Inlet
Component A (Isocyanate) Inlet
Recirculation/Block Hose Connections
Maximum Heated Hose Length***
Weight
Wetted Parts
Voltage Tolerance (50/60 Hz)
200-240VAC Nominal, 1 Phase
200-240VAC Nominal, 3 Phase (Delta)
350-415VAC Nominal, 3 Phase
(WYE 200-240VAC Line to Neutral)
*Full load amps with all devices operating at maximum capabilities with 210 ft (64.1 m) of hose.
***210 ft (64 m) of heated hose will produce the maximum allowable heat capacity. 310 ft (94 m) of heated hose
may be used, but will have 25% less heat capacity.
3A1570V
US
3500 psi
125 psi
100 psi
3
32 scfm (0.9 m /min) 00 tip at 2000 psi stall pressure
13,000 Watts
56 amps at 230 V, 1 Phase
45amps at 230 V, 3 Phase
26 amps at 380 V, 3 Phase
190 °F
180 °F
120 °F
1.5 gal/min at 2000 psi
0.017 gal/cycle
10,200 Watts
2790 Watts
70.2 dB(A)
80.1 dB(A)
250-1500 centipoise (typical)
300 psi or 15% of output
pressure
20 mesh standard
40 Micron
3/4 npt(f) swivel
3/4 npt(f) swivel
Iso (A) side: #5 JIC (m); Resin (B) side: #6 JIC (m)
210 ft of 3/8 ID
310 lb
Carbon steel, stainless steel, chrome, aluminum,
Fluoroelastomer, PTFE, nylon
195-253VAC
195-253VAC
338-457VAC
Technical Specifications
Metric
24 MPa, 241 bar
0.9 MPa, 9 bar
689 MPa, 6.9 bar
35:1
88 °C
82 °C
49 °C
(0.064 ltr/cycle)
2.1 MPa, 21 bar or 15% of
output pressure
140.6 kg
63