Replace An Assigned User Key With A New User Key - Digilock Numeris Versa Mini Product Manual

Programming Instructions - In Assigned Use Functionality
Replace an Assigned User Credential
1
Replace an Assigned User Code
with a New User Key:
Press = ` then insert a valid Manager Key.
A two-tone beep will be heard and the LED
will turn on.
1
Replace an Assigned User Key
with a New User Key:
Press = ` then insert a valid Manager Key.
A two-tone beep will be heard and the LED will
turn on.
1
Replace an Assigned User Key
with a New User Code:
Press = ` then insert a valid Manager Key.
A two-tone beep will be heard and the LED will
turn on.
Product Guide
2
While the LED is on,
= [assigned user code]
`.
press
A two-tone beep will be heard.
2
While the LED is on, insert the assigned user Key.
A two-tone beep will be heard.
2
While the LED is on, insert the assigned User Key.
A two-tone beep will be heard.
Keypad
Shared & Assigned Use Functionality
3
While the LED is on, insert a new User Key.
Two sets of two-tone beeps will be heard
and the LED will turn off.
3
While the LED is on, insert a new User Key.
Two sets of two-tone beeps will be heard
and the LED will turn off.
3
While the LED is on,
= [new 4-7 digit user code] `
Press
= [the same 4-7 digit user code] `
Two sets of two-tone beeps will be heard
and the LED will turn off.
.
7