Advertisement
Quick Links
Versa locks with a keypad interface are operated by a 4 digit User Code or by an ADA compliant User Key. A Manager Code provides
management access. Programming is accomplished via an Owner Code unique to the lock system.
Lock Orientation
Alpha Numeric
Keypad
C Button
Key Button
Key Slot
LED Usage Indicator
Shared Use
Knob
Assigned Use
ADA Handle
Vertical with Knob on Bottom
Codes
Operates the lock
Overrides user access
Allows management inspection
Programs Manager Code
Programs Owner Code
Assigns User Code
Sets lock functionality
Provides external power
Key Insertion
Numeris logo must face towards the keypad.
1
Product Guide
Vertical with Knob on Top
____
Power Jumper Key
User Code
•
Keypad
Code Managed
Shared & Assigned Use Functionality
Horizontal with Knob on Left
Horizontal with Knob on Right
_____
4-digit
5-digit
Manager Code
•
•
•
•
•
•
______
6-digit
Owner Code
•
•
•
•
•
•
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Digilock numeris versa standard
Summary of Contents for Digilock numeris versa standard
- Page 1 Product Guide Keypad Code Managed Shared & Assigned Use Functionality Versa locks with a keypad interface are operated by a 4 digit User Code or by an ADA compliant User Key. A Manager Code provides management access. Programming is accomplished via an Owner Code unique to the lock system. Lock Orientation Alpha Numeric Keypad...
-
Page 2: Programming Instructions
Product Guide Keypad Code Managed Shared & Assigned Use Functionality Programming Instructions Install the lock or determine configuration prior to programming and operating. Default Settings Functionality = Shared Use Owner Code Manager Code (6-digit code) 1 2 3 4 5 6 (5-digit code) 1 2 3 4 5 Initial Setup... - Page 3 Product Guide Keypad Code Managed Shared & Assigned Use Functionality Programming Instructions Assign a New User Code (for assigned use functionality only) Press = ` [Manager Code] ` . A two-tone beep will be heard and the green LED will turn on. Press = [new assigned 4-digit User Code] ` .
- Page 4 Product Guide Keypad Code Managed Shared & Assigned Use Functionality Operating Instructions Shared Use Functionality Operate with a self-selected User Code Make sure the lock is unlocked and available for use. Use the Owner or Manager Code to unlock. ▪ To lock: Close the door, press [any 4-digit User Code] , and then turn the handle to the locked position.
-
Page 5: Battery Replacement
For immediate access, operate with the Owner Code. Does not Operate with the Owner Code The lock does not recognize the Owner Code. Contact Digilock Support. No Audible Feedback when = is Pressed The lock may be in Sleep Mode or the batteries may need to be replaced. For immediate access, operate with a Power Key.
Need help?
Do you have a question about the numeris versa standard and is the answer not in the manual?
Questions and answers