Programming Instructions - In Shared Use Functionality; Set Lock Functionality; Auto Unlock; To Turn On Auto Unlock - Digilock Numeris Versa Mini Product Manual

Programming Instructions

Set Lock Functionality

Each lock can be set for either shared or assigned use functionality. Press = to check functionality. If in shared use, LED is red. If in
assigned use, LED is green.
1
To set for assigned use:
Press =` 65 ` .
The red LED will turn on.

Programming Instructions - In Shared Use Functionality

Auto Unlock

When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF
(does not auto unlock).
1a

To turn on Auto Unlock:

Press =` 95 ` .
The LED will fl ash.
While the LED is fl ashing, insert the Programming Key.
A two-tone beep will be heard and the LED will turn on.
1
To turn off Auto Unlock:
Press =` 94 `.
The LED will fl ash.
4
Product Guide
2
Insert the Programming Key.
A two-tone beep will be heard
and the green LED will fl ash once.
1b
Keypad
Shared & Assigned Use Functionality
1
To set for shared use:
Press =` 56 ` .
The green LED will turn on.
2
While the LED is on, enter the number of hours from
then press ` .
Two sets of two-tone beeps will be heard and the LED will turn off.
For example:
Press 8 ` to set the lock to auto unlock 8 hours after locking.
2
While the LED is fl ashing, insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
2
Insert the Programming Key.
A two-tone beep will be heard
and the red LED will fl ash once.
1 - 9 9