Table of Contents
Advertisement
Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape with its record tab intact in the VCR.
If playback begins, press the VCR button, then press the STOP/p
button to stop the tape.
3
If the VCR/TV light appears on the display panel, go to step 4. If
the VCR/TV light does not appear, press the VCR button,
then press the VCR/TV button once.
4
Press the VCR button, then press the SPEED button
repeatedly until the desired tape speed appears briefly on
the screen. (Details about tape speed are on page 32.)
5
Use the CH(annel) o/p buttons or the Number buttons
to select the channel to be recorded.
6
Press the REC(ord)/OTR button once to start recording.
The RECORD light will appear on the VCR display panel.
7
To pause the recording, press the PAUSE/STILL button
once. The RECORD light will flash. To resume recording,
press the REC(ord)/OTR button or press the
PAUSE/STILL button again. The RECORD light will come on
again.
8
To stop recording, press the STOP/p button.
Recording 27
1
Turn on the TV.
2
Insert a tape in the VCR.
EJECT
POWER
MENU
STATUS/EXIT
CLEAR
1
2
5
4
5
7
8
MEMORY
ALT.CH
0
REC
PAUSE
/OTR
/STILL
PLAY
REW
F.FWD
STOP
CH.
MUTE
VCR
TV
CBL/DBS
3
VCR/TV
SPEED TIME SEARCH
ENTER
SLOW
4
Helpful Hints
• If you press the REC(ord)/OTR but-
ton when there is not a tape in the
VCR, NO CASSETTE will flash on the
screen.
• If you press the REC(ord)/OTR but-
ton while a tape without a record
tab is in the VCR, the VCR will eject
the tape and PROTECTED CAS-
SETTE CANNOT RECORD will flash
on the screen.
• Other recording options are on
pages 28-34.
• You can change the tape speed dur-
ing a recording, but some distortion
will appear on the tape.
• The VCR will record in a preset
volume.
3
6
9
6
7
8
VOL.
Advertisement
Table of Contents
