Table of Contents
Advertisement
10 Hookups with a Stereo TV
VIDEO (yellow) and
AUDIO (white)
Audio and Video cables are not supplied.
1
Connect the antenna or cable to the ANT(enna) IN Jack
on the back of the VCR.
2
Connect a video cable to the yellow VIDEO OUT Jack on
the back of the VCR. Then, connect the other end of the
video cable to the VIDEO IN Jack on your TV.
3
Connect an audio cable to the white AUDIO OUT Jack
on the back of the VCR. Then, connect the other end of
the audio cable to the AUDIO IN Jack on your TV.
(If your TV has Right and Left AUDIO IN Jacks, you must use a
"Y" splitter audio cable as illustrated to deliver audio to the TV's
right and left channels.)
4
Turn on your TV, making sure it is in Line Input mode. This
might be referred to as the TV's Audio / Video In channel or the
Auxiliary In channel. Please refer to your TV owner's manual for
details.
AUDIO
OUT
IN
VIDEO
CH3 CH4
2
OUT Jacks
1
antenna or cable to
ANT(enna) IN Jack
ANT
IN
OUT
Video Cable
Audio and Video
IN Jacks on TV
3
"Y-splitter"
Stereo Audio
Cable
Advertisement
Table of Contents
