Playing - Philips VR420CAT Owner's Manual

26 Playing

Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape in the VCR. The POWER, VCR/TV and CST. IN
lights will appear on the display panel. If the tape's record tab has
been removed, playback will start automatically.
3
If playback does not start automatically, press the VCR
button, then press the PLAY/o button.
4
Press the STOP/p button to stop playback.
5
Press the REW(ind)/{ button to rewind the tape.
6
Press the EJECT button to remove the tape.
S-VHS Quasi Play Back (SQPB)
This unit has a SQPB function that allows you to view a tape
recorded in S-VHS format. A tape recorded in S-VHS format will
play the same as a tape recorded in normal format. This unit auto-
matically detects whether the tape is recorded in S-VHS format or
in normal format.
When you play a tape recorded in S-VHS format on this unit, you
can not get the high resolution that would be available on an S-
VHS VCR. Noise lines (black and white streaks) may appear on
the picture.
1
Turn on the TV.
2
Insert a tape in the VCR.
6
EJECT
POWER
MENU CLEAR
STATUS/EXIT
1 2
4 5
7 8
3
MEMORY
0
REC PAUSE
/OTR
PLAY
REW F.FWD
STOP
CH.
MUTE
VCR TV CBL/DBS
VCR/TV SPEED TIME SEARCH
ENTER SLOW
Helpful Hints
• If the tape you want to play is already in
the VCR, make sure the VCR power is
on and the VCR is in VCR position. (The
VCR/TV light will appear on the display
panel. If it does not, press the VCR/TV
button once.) Then press the VCR but-
ton, then press the PLAY/o button.
• Other playback options and features
are on pages 35-40.
• If REPEAT PLAY is set to ON, playback
will begin automatically when you insert
a tape, even when the record tab is
intact. Details are on page 35.
• Tape playback will not begin automati-
cally if a timer recording is set and the
VCR power is off. Details are on page
39.
3
6
9
ALT.CH
/STILL
5
4
VOL.