One-Touch Recording 27 - Philips VRZ222AT Owner's Manual

VRZ222 layout 4/8/99 10:19 PM
The One-Touch Recording (OTR) feature allows you to set an
immediate timed recording 30 minutes to eight hours long. Before
you begin:
Set up the channels at the VCR.
Select a recording speed (SP, LP, SLP) with the SPEED button.
Put a tape in the VCR. Make sure the tape's record tab is intact
and the tape is long enough to record the program(s).
Place the VCR in VCR position. (The VCR light will appear on
the display panel. If it does not, press the VCR/TV button once.)
1
Press the VCR button.
2
Press the CHANNEL o/p buttons or the Number but-
tons to select the channel you want to record.
3
Press the REC(ord)/OTR button repeatedly until the
desired recording length (30 minutes to eight hours)
appears on-screen. Recording will begin immediately. The REC
light and the Timer light will appear on the display panel.
OTR (0:30)
CH12
4
To stop an OTR before recording is finished, press the
STOP/p button or the POWER button.
To cancel the OTR but continue recording, press the
REC(ord)/OTR button repeatedly until REC appears in the upper
left corner of the TV screen. The REC light will remain on the
display panel of the VCR, but the Timer light will disappear.
Page 27

One-Touch Recording 27

1
2 3
1
5 6
4
8 9
7
0
+100
4
PLAY
REW F.FWD
STOP
3
Helpful Hints
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired length appears on-screen.
• If you begin an OTR when another
recording is paused, the OTR will
begin.
• You can not pause an OTR.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority. The timer
recording will not take place.
2