Download Print this page

Philips VR420/75 Instructions For Use

4 head vcr

Advertisement

Quick Links

Instructions for use
Video Cassette Recorder
VR220/55
VR420/55
C
C
ongratulations on purchasing your new VCR. Spare a few moments to read this instruction
manual to get better results, and to avoid any costly mistakes.
WARNING : DANGEROUS VOLTAGE INSIDE
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
The POWER button does not completely shut off the mains power from the unit, but
switches operating current on or off only.
The rating plate is on the rear of the unit.
When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to
allow for ventilation (10 cm or more on both sides, on top and at the rear.)
When discarding batteries, environmental problems must be considered and the local rules or laws governing
the disposal of these batteries must be followed strictly.
Failure to heed the following precautions may result in damage to the VCR, remote control or video cassette.
1. DO NOT place the VCR . . .
... in an environment prone to extreme temperatures or humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are generated.
... on a surface that is unstable or subject to vibration.
2. DO NOT block the VCR's ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able
to get out.)
3. DO NOT place heavy objects on the VCR or remote control.
4. DO NOT place anything which might spill on top of the VCR or remote control.
(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)
5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places with water. Also DO NOT place any containers filled with
water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on top of this unit.
7. DO NOT place any naked flame sources, such as lighted candles, on the apparatus.
8. AVOID violent shocks to the VCR during transport.
SmartPicture
One Touch Recording
Child Lock
On Screen Display
Automatic Operations
Timer Recording
Index Search
Digital Studio Picture Control
S
S
etting
U
U
p
Setting the Video Channel
Menu Operations
Before operating the VCR, be familiar with the
This VCR is designed to send picture and sound
menu operations first because most of the features
signal on UHF channel E36 to the TV, through the
built into the VCR can be available only on the
RF coaxial cable.
menus.
If you want to change this video channel (E36) to
another channel (between E28 to E60), follow the
1 Press VCR on the remote control.
procedure below before turning on the VCR for the
• When using the buttons on front panel, skip this step.
first time.
2 Press MENU to display the main menu screen.
5
1 Make sure the VCR is turned off and no
3 Press PLAY
or STOP
to select a desired
cassette is inserted.
feature on the menu, then press OK/STATUS.
2 Turn on the TV, and tune it to any channel (UHF
4 When you select a feature, go to the section in
28 to 60) you want to use as the video channel
this manual and follow the instructions described
on the TV.
there.
• Select a channel not used in your area.
To go back to the previous menu screen, press
7
0
2
3 Press STOP/EJECT
/
REW
on the front panel for
.
more than 5 seconds.
To change the setting of a menu item, press FF
The following indication appears on the display.
Press MENU to exit.
TV system number starts flashing.
Initial Set Up
For the first time you turn on this VCR, some basic
5
4 Press CH
/
on the front panel to select an
settings must be done first before going on to further
appropriate TV system number for your area.
operations.
1: For B/G. (For West Europe, ASEAN coun
1
tries, New Zealand)
Select the Language
2: For D/K. (For China, Russia, East Europe)
1 Press POWER.
3: For I. (For Hong Kong, South Africa, United
The language selection screen
Kingdom)
appears.
5 Press OK/STATUS.
5
2 Press PLAY
or STOP
The channel number starts flashing on the
to select either "ENGLISH",
display.
or "
" (Chinese).
Channel number starts flashing.
3 Press OK/STATUS.
5
6 Press CH
2
/
on the front panel to select the
Setting the Clock/Date
channel you have tuned on the TV as the video
5
channel in step 2.
1 Press PLAY
or STOP
to
set the time. Each time you
press the button, the set time
Test signal
changes by one-minute inter-
(two vertical white bars)
vals.
Press and hold the button to change time by 30-
To watch a picture from this VCR on the TV,
minute intervals.
select the same channel you have selected as the
When the time is correct, press OK/STATUS.
5
video channel (in step 2 above) on the TV.
2 Press PLAY
or STOP
to set the date. Each
time you press the button, the date changes in
7 Press OK/STATUS to finish the video channel
one-day increments. Press and hold the button to
setting.
change dates in 15-day increments. When the date
is correct, press OK/STATUS.
If you use only external video input (AV) mode to
5
3 Press PLAY
or STOP
watch the picture from this VCR:
to set the year. Each
You can turn off the video channel output. To turn off
time you press the button, the year changes by
the video output channel, press CH
until "– –"
one-year intervals. Press and hold the button to
appears on the channel number position.
change years rapidly. When the year is correct,
press OK/STATUS.
5
D
escription of
C
ontrols
D
C
Front panel
1 1 1 1 1
2 2 2 2 2
3 3 3 3 3 4 4 4 4 4 5 5 5 5 5 6 6 6 6 6 7 7 7 7 7
POWER
REC / OTR
PLAY
MENU
VIDEO
AUDIO
STILL/PAUSE
COLOUR MODE
CHANNEL
/
STATUS
OK/
8 8 8 8 8 9 9 9 9 9
@ @ @ @ @ # # # # # $ $ $ $ $ % % % % % ^ ^ ^ ^ ^
0 0 0 0 0
! ! ! ! !
Rear panel
1 1 1 1 1
2 2 2 2 2
3 3 3 3 3 4 4 4 4 4
ANT.IN
IN
OUT
AUDIO
VIDEO
RF OUT
5 5 5 5 5 6 6 6 6 6 7 7 7 7 7
Display Window
1 1 1 1 1
2 2 2 2 2
3 3 3 3 3
4 4 4 4 4
On- Screen Display
5 5 5 5 5
1 1 1 1 1
PLAY
15:00
6 6 6 6 6
CH12
2 2 2 2 2
AUTO
7 7 7 7 7
B-----+-----+-----+-----+-----+-----E
8 8 8 8 8
3 3 3 3 3
9 9 9 9 9
REMAIN 2:30
INDEX - 1
4 4 4 4 4
LP
0:00:00
LPT0559-001A
2
4 Press PLAY
4 Press MENU.
CONNECT ANTENNA OR CABLE
to select "SET CLOCK" or
The message on the right will
TO VCR FOR AUTO CH. SET
"LANGUAGE", depending
appear.
on which setting you want
READY: OK
to change.
3
END: MENU
Select TV System
5 To change clock/date:
Repeat step 2 (Setting the Clock/Date) of
1 Press OK/STATUS. The TV
SYS COUNTRY
B/G W.EUR. ASEAN AUST.
"Initial Set Up" on page 5.
system selecting menu appears
NZ
D/K CHINA RUS. E.EUR.
To change language:
I
HK S.AF. UK
on the TV.
5
Press FF
2 Press PLAY
or STOP
language English or
SELECT:
CONFIRM: OK
to select the appropriate TV
END: MENU
6 Press MENU to exit.
system of your residential area.
To Reset the Channels
B/G: For West Europe, ASEAN countries,
Australia, New Zealand.
If you want to re-do the auto programming, follow
3
D/K: For China, Russia, East Europe.
the procedure below;
.
1 Press VCR.
I: For Hong Kong, South Africa,
2 Press MENU.
United Kingdom.
3 Press PLAY
4
to select "TUNER SET UP"
Start Auto Programming
then press OK/STATUS.
Press OK/STATUS. Auto prog-
4 Press PLAY
AUTO CH. SET PROCEEDING
ramming starts and the message on
to select "AUTO TUNER SET
PLEASE WAIT
the right appears on the TV.
UP" then press OK/STATUS.
5 Press PLAY
START
FINISH
When the auto programming
to select the appropriate TV
is completed
system [(BG, DK, I)] of your residential area.
ENGLISH
The message on the right appears
6 Press OK/STATUS. Auto programming starts.
AUTO CH.SET COMPLETED
When it ends, programmed channels, frequencies
on the TV, and the lowest channel
will be tuned in.
5
and TV systems are shown on the display.
SELECT:
CONFIRM: OK
Press CH
or
to change
7 Press MENU to exit.
END: MENU
channels on the VCR.
To Delete or Edit Receivable Channels
You have now completed the initial
setting.
1 Press VCR.
If you stop the initial setup procedure while it is
2 Press MENU.
proceeding:
3 Press PLAY
The VCR enters the initial setup mode again the next
TIME - - : - -
"TUNER SET UP", then press OK/STATUS.
time you turn on the VCR.
DATE 01/01/01
4 Press PLAY
Initial setup will not start in the following cases:
"CHANGING TUNER SET UP", then press OK/
SET:
NEXT: OK
• If there is a tape inserted.
END: MENU
STATUS. The programmed
• If any of the initial setup procedures is finished
channel information list
manually.
appears.
To Reset the Time or Language
5 Press PLAY
You can always change the time and language
until the desired channel
setting after you completed the initial set up.
setting flashes.
5.1: TO DELETE UNWANTED CHANNELS:
1 Press VCR.
Press CLEAR. Repeat this step until you delete
2 Press MENU.
5
VCR SET UP
TUNER SET UP
all unwanted channels.
3 Press PLAY
or STOP
INITIAL SET UP
to select "INITIAL SET UP"
then press OK/STATUS.
SELECT:
CONFIRM: OK
END: MENU
6
1 1 1 1 1
POWER button
2 2 2 2 2
( P.12)
Remote Control
Cassette Compartment
3 3 3 3 3
1
4 4 4 4 4
MENU button
REC/OTR
button
5 5 5 5 5
( P.7)
# # # # #
(Rewind) button
¡
( P.5, P.7, P.10)
6 6 6 6 6
3
$ $ $ $ $
1 1 1 1 1
PLAY
button ( P.7, P.8, P.9)
7 7 7 7 7
CBL / DBS
TV
VCR
2 2 2 2 2
(Fast Forward) button ( P.5, P.7, P.10,
% % % % %
3 3 3 3 3
VCR/TV
POWER
SMARTPICTURE
8 8 8 8 8
P.12)
9 9 9 9 9
VIDEO input jack
( P.14)
QUICK PROGRAMMING
1
+
2
+
3
^ ^ ^ ^ ^
AUDIO input jack
0 0 0 0 0
( P.14)
START
STOP
DATE
8
-
-
! ! ! ! !
STILL/PAUSE
button
( P.10)
4
5
6
DAILY
WEEKLY
DBS
COLOUR MODE button
@ @ @ @ @
( P.7)
7
8
9
& & & & &
4 4 4 4 4
Display Window (see below)
SPEED
DBS
# # # # #
* * * * *
ALT
0
CLEAR
IR (infrared) remote sensor
5 5 5 5 5
$ $ $ $ $
STILL/SLOW
( ( ( ( (
-
+
OK/STATUS button
% % % % %
5 5 5 5 5
( P.4, P.5, P.9)
∞ ∞ ∞ ∞ ∞
6 6 6 6 6
) ) ) ) )
REW
FF
CHANNEL
/
button
( P.4, P.5, P.7,
PLAY
7 7 7 7 7
^ ^ ^ ^ ^
P.8, P.10, P.12, P.14)
7
0
q q q q q
8 8 8 8 8
STOP/EJECT
/
button
( P.4, P.7, P.9)
STOP
VOL
OK/STATUS
CH
w w w w w
9 9 9 9 9
1 1 1 1 1
MENU
e e e e e
AC power cord
2 2 2 2 2
0 0 0 0 0
TIMER
r r r r r
AUDIO IN (input) jack
3 3 3 3 3
( P.4, P.14)
! ! ! ! !
t t t t t
TURBO
AUDIO /
SKIP
REC END
AUDIO OUT (output) jack
4 4 4 4 4
( P.4, P.14)
@ @ @ @ @
y y y y y
TIMER
MUTE
SEARCH SEARCH
ANT. (antenna) IN (input) terminal
u u u u u
(
P.4)
5 5 5 5 5
EJECT
REC
/OTR
VIDEO IN (input) jacks
6 6 6 6 6
( P.4, P.14)
VIDEO OUT (output) jack
7 7 7 7 7
( P.4, P.14)
RF OUT (output) terminal (to TV)
(
P.4)
To insert the batteries:
Install two AA batteries R6 (SUM-3)/AA
1 1 1 1 1
- matching the polarity indicated inside
(Timer) indicator
2 2 2 2 2
( P.12)
the battery compartment.
3 3 3 3 3
PLAYBACK indicator
RECORDING indicator
4 4 4 4 4
Digital clock/Channel/Speed indicator
1 1 1 1 1
Operation mode
2 2 2 2 2
SmartPicture Setting
3 3 3 3 3
Remaining tape length
4 4 4 4 4
CAUTION
Tape speed
5 5 5 5 5
On Battery Replacement
Current time
6 6 6 6 6
Do not mix old and new batteries.
7 7 7 7 7
Channel Number
(Also never mix alkaline batteries with
Tape position indicator
8 8 8 8 8
manganese batteries.)
Time counter
9 9 9 9 9
Index Number
5
or STOP
* If you have accidentally deleted a channel,
2
CLOCK
press REW
.
LANGUAGE
ENGLISH
5.2: TO EXCHANGE CHANNEL POSI-
TION: Press OK/STATUS once so that the
SELECT:
CHANGE:
END: MENU
channel number flashes. Using the number but
on on the remote control, enter the other
channel number that you want to exchange with,
then press OK/STATUS.
3
5.3: TO FINE-TUNE CHANNELS
repeatedly to choose your preferred
Press OK/STATUS twice so that the frequency
.
5
indication flashes. Press PLAY
to fine-tune the station until you get the best
possible picture, then press OK/STATUS.
5.4: TO CHANGE THE TV SYSTEM:
This is necessary if no sound comes out on the
channel.
VCR SET UP
TUNER SET UP
5
Press OK/STATUS three times so that the TV
INITIAL SET UP
or STOP
system indication flashes. Press PLAY
SELECT:
CONFIRM: OK
STOP
to select the approriate TV system
END: MENU
5
(BG, DK, I) so that the sound comes out, then
or STOP
press OK/ STATUS.
CHANGING TUNER SET UP
AUTO TUNER SET UP
6 Press MENU to exit.
5
or STOP
Manual Channel Setting
SELECT:
CONFIRM: OK
END: MENU
1 Repeat steps 1-4 of "To delete or edit receivable
channels" on the left column.
5
2 Press PLAY
or STOP
until a vacant channel
in which you want to store a new channel starts
flashing, then press OK/STATUS.
5
3 Press PLAY
or STOP
to select
the search starting band, then press OK/STATUS.
VHF L: Starts searching from the VHF L band.
VHF H: Starts searching from the VHF H band.
5
or STOP
to select
UHF: Starts searching from the UHF band.
Searching starts, and when a station is tuned in,
5
or STOP
to select
searching stops and the tuned frequency is shown
on the TV.
5
4 Press PLAY
or STOP
to
CH FRQ SYS CH FRQ SYS
select "STORE CHANNEL",
01 150 BG
07 229 BG
02 165 BG
08 237 BG
then press OK/STATUS.
03 195 BG
09 355
BG
5
04 205 BG
10 365 BG
05 213 BG
11 374 BG
The programmed channel in-
or STOP
06 221 BG
12 384 BG
SELECT:
SELECT:
DELETE: CLEAR
formation list appears again
END: MENU
CHANGE CH: OK
END: MENU
with the settings of the newly tuned channel
flashing.
If you do not want to store the channel, select
"CONTINUE SEARCH", then press OK/
STATUS so that the search starts again.
5 Press MENU to exit.
G
etting
G
1 1 1 1 1
2 2 2 2 2
CBL/DBS button
VCR to TV Connection Using RF Cable
POWER button
3 3 3 3 3
( P.7, P.12)
VCR/TV button
4 4 4 4 4
( P.7)
1 1
1
Disconnect the antenna or cable from the TV.
5 5 5 5 5
ALT/SPEED button
( P.7, P.12)
2 2
Connect the antenna or cable to the ANT. IN terminal on the back of the VCR.
2
1
STILL/SLOW – /™ button
6 6 6 6 6
3
5
( P.8)
3 3
Connect the VCR to the TV using the RF coaxial cable.
3
7 7 7 7 7
PLAY
/
button
( P.5, P.7, P.8)
2
4 4
4
Plug the AC power cords of the VCR and TV into the AC outlets.
(REWIND)/
button
8 8 8 8 8
( P.5, P.7)
∞ ∞ ∞ ∞ ∞
7
STOP
/
button
9 9 9 9 9
5
( P.5, P.7)
∞ ∞ ∞ ∞ ∞
0 0 0 0 0
VOL (volume)
/
button
MENU button
! ! ! ! !
( P.5)
TURBO TIMER button
@ @ @ @ @ 0
( P.13)
# # # # #
EJECT button
( P.7)
TV button
$ $ $ $ $
VCR button
% % % % %
SMARTPICTURE button
^ ^ ^ ^ ^
( P.9)
Number buttons (0, 1, 2, 3, 4, 5, 6, 7, 8 and 9)
& & & & &
( P.12)
* * * * *
CLEAR button
( P.6, P.8, P.12)
STILL/SLOW 0 button
( ( ( ( (
( P.7, P.8)
STILL/SLOW + /£ button
) ) ) ) )
3
( P.8)
q q q q q
3(Fast Forward) /
button
( P.7)
OK/STATUS button
w w w w w
5
CAUTION
CH (channel)
/
button
e e e e e
( P.4, P.5, P.10, P.14)
Do not plug the AC power cords until
r r r r r
TIMER button
( P.12)
all connections are completed.
REC (ord) END SEARCH button
t t t t t
( P.9)
y y y y y
SKIP SEARCH button
( P.8)
To watch a picture from this VCR on the TV, select UHF E36 channel (video
AUDIO/MUTE button
u u u u u
channel of this VCR when shipped from the factory).
REC (record)/ OTR button
( P.7, P.10, P.14)
If you want to change video channel, see "Setting the Video Channel." ( P.5)
Note:
1
Button
does not function on this VCR.
To Operate your TV.
You can use this remote control to operate some of
VCR to TV Connection Using AUDIO/VIDEO Cable
PHILIPS TV's. To operate other manufacturer's TV, you
have to set the code. Refer to page 15 for setting code instructions.
If your TV has audio/video connectors, complete the connection below to get better pictures and sounds when playing
back a tape. To watch a picture from this VCR on the TV, select the AV mode on the TV.
Followings are the operative buttons.
TV: Makes the remote control ready for operating the TV. Make
Note;
sure you press this button before pressing the other operative
buttons.
Even if you are using this AV connection, you must also
POWER: Turns the TV on or off.
complete the RF connection
VCR/TV: Selects TV mode or Auxiliary mode at TV.
above.
ALT (for PHILIPSTV only): Goes back to the previously selected
channel on TV.
5 5 5 5 5 ∞ ∞ ∞ ∞ ∞
VOL
: Changes the TV volume.
5 5 5 5 5 ∞ ∞ ∞ ∞ ∞
CH
: Changes the TV channels.
5 5 5 5 5 ∞ ∞ ∞ ∞ ∞
; :, MENU (for PHILIPS TV only): Operates the TV menu.
OK/STATUS - For PHILIPS TV : Displays the on- screen
information. For other manufacturer's TV; functions as an
ENTER button after pressing the number buttons while
selecting channels.
AUDIO/MUTE: Turns off the TV sound.
NUMBER buttons: To select channels on TV.
3
B
B
asic
Selecting Colour Mode
Recording
Before using the VCR, you need to set the colour
When using this VCR, an index mark is always
mode both for recording and playback.
marked at the beginning of every recording. This
Press COLOUR MODE on the front panel for more
index marks make it easier for you to search for the
than 2 seconds. The current setting will appear on
beginning of the recordings. See "Index Search" at
the screen for about 5 seconds. While the current
setting appears, press COLOUR MODE repeatedly,
page 9.
the setting changes as follows.
1
AUTO: Normally select this mode. The colour system
is automatically detected.
1 Turn on the TV.
If "AUTO" does not work well, choose the
or STOP
2 Select the video channel (or AV mode).
other settings below.
NTSC3.58: To record the NTSC signals or playback an
2
NTSC3.58 tape on an NTSC TV.
NTSC4.43: To record the NTSC signals or playback an
= = = = =
NTSC4.43 tape on a PAL TV.
Insert a cassette with the record tab in place.
NTSC
PAL TV (ONLY FOR PLAYBACK): To
The VCR turns on.
playback an NTSC3.58 tape on a PAL TV.
To rewind the tape, press REW
5
PAL:
To record PAL signals or playback a PAL TV.
or
To reset the time counter, press CLEAR.
MESECAM: To record SECAM signals or playback a
MESECAM tape.
When playing back an NTSC tape with "AUTO" mode
3
selected, the NTSC signal is converted to PAL signal and is
played back.
After pressing VCR, press ALT/SPEED until the
Playback
desired tape speed (SP, LP or SLP) appears on the
screen.
SP, LP: For PAL signal.
1
On TV
SP, SLP: For NTSC signal.
1 Turn on the TV.
4
2 Select the video channel (or AV mode).
Press CH
2
On VCR
channel to record.
Insert a cassette. The VCR turns on.
5
• If the record tab on a cassette is removed, playback
will start automatically.
Press REC/OTR
• If a cassette is already in the VCR, turn on the VCR.
To pause recording
3
Press STILL/SLOW 0 briefly. To resume
Start Playback
3
recording, press the same button again.
Press PLAY
.
To stop recording
To pause playback and view still picture, press STILL/
Press STOP .
STORE CHANNEL
SLOW 0 (or STILL/PAUSE on the front panel).
3
CONTINUE SEARCH
Press PLAY
to resume playback.
To watch another TV programme while recor-
¡
To rapidly locate a particular scene, press FF
or
1
ding
CONFIRM: OK
REW
during playback. s(No sound comes out.)
3
Select a different channel you want to watch on
Press PLAY
to resume playback.
the TV.
To stop playback, press STOP .
You can watch the programme of the selected
1
To rewind the tape, press REW
when the tape is not
channel on the TV, without affecting recording on
running.
the VCR.
¡
To fast forward the tape, press FF
when the tape is
• When a tape reaches its end during recording, the
not running.
recording stops and
0
To eject the tape, press
EJECT.
To turn off the VCR, press POWER.
7
C
onnected
U
p
C
U
Indoor antenna
Back of TV
Outdoor antenna
Back of VCR
ANT. IN
ANT.IN
IN
OUT
VHF
AUDIO
VIDEO
UHF
RF OUT
RF coaxial
Cable
cable
RF OUT
Back of TV
Back of VCR
Audio cable
ANT.IN
IN
IN
OUT
AUDIO
A
U
D
I
O
VIDEO
RF OUT
V
D
I
E
O
Video cable
To VIDEO/AUDIO OUT jacks
To video and audio
input jacks
4
O
O
perations
To prevent accidental erasure:
Break off the record tab with a
screwdriver.
To record again, cover the hole
with adhesive tape.
Special Effect Playbacks
On TV
Are you familiar with tape playback? If so, you are
ready to enjoy the special effect playback features
described below.
To skip playback for a certain period
On VCR
Press SKIP SEARCH button 1 to 4 times during
playback to search forward for 30 seconds by the
1
time counter reading.
Each time you press the button, the search time
.
increases as follows:
=
=
=
30
60
90
120 sec.
Select Tape Speed
The VCR automatically resumes normal playback
after searching for the specified period.
To view a still picture
Press STILL/SLOW 0 (or STILL/PAUSE on
the front panel) briefly during playback.
Playback is freezed and a still picture appears.
Select a Channel
5
Press the STILL/SLOW 0 button repeatedly to
or
or Number buttons to select the
advance the still picture frame by frame.
3
To resume playback, press PLAY
.
To view a slow motion picture
Start Recording
Press STILL/SLOW 0 for more than 2 seconds
.
during playback.
To decrease the slow motion speed, press
STILL/SLOW –.
To increase the slow motion speed, press
STILL/SLOW +.
3
To resume playback, press PLAY
.
Notes:
• No sound comes out during special effect
playbacks.
• If you keep viewing slow motion and still pictures
for more than 5 minutes, the VCR automatically
stops to protect the tape and video heads.
• During special effect playbacks, some noise bars
will appear on the TV screen.
blinks on the display window.
8

Advertisement

loading

Summary of Contents for Philips VR420/75

  • Page 1 : Changes the TV channels. 5 5 5 5 5 ∞ ∞ ∞ ∞ ∞ ; :, MENU (for PHILIPS TV only): Operates the TV menu. OK/STATUS - For PHILIPS TV : Displays the on- screen information. For other manufacturer's TV; functions as an ENTER button after pressing the number buttons while selecting channels.
  • Page 2 • If “ON SCREEN MODE” is set to “OFF,” no VCR status appears though you press OK/ STATUS. efore equesting Remote Control TV Manufacturers’ Codes The remote control cannot work. PHILIPS 01, 02, 03 EMERSON GOLDSTAR GRUNDIG 24, 25 , then release TV. HITACHI...

This manual is also suitable for:

Vr220/55