Table of Contents
Advertisement
3. Put the appliance on the sidewall on
a clean and smooth surface. Place
each foot into a separate hole, in the
plinth, and rotate it clockwise.
4. If the floor is not equally flat, use the
adjustable feet on the bottom of the
appliance to set a stable position for
the appliance.
To install all the accessories, do the first
step in an opposite sequence.
14.15 Anti-tilt protection
Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
You must install the anti-tilt protection. If
you do not install it, the appliance can tilt.
Your appliance has the symbol shown on
the picture (if applicable) to remind you
about the installation of the anti-tilt
protection.
B
1. Install the anti-tilt protection 275 -
280 mm down from the top surface of
the appliance and 126 - 130 mm from
the side of the appliance into the
circular hole on a bracket. Screw it
into the solid material or use
applicable reinforcement (wall).
CAUTION!
Make sure you install the
anti-tilt protection at the
correct height.
Make sure that the surface
behind the appliance is
smooth.
ENGLISH
29
Advertisement
Table of Contents
