Table of Contents
Advertisement
7. Programming a recording (TIMER)
General information
Use a TIMER programming to automatically start
and stop a recording at a later time or date. The
video recorder will switch to the right programme
number and begin recording at the correct time.
With this video recorder, you can pre-programme
up to eight recordings within a period of one
year. To make a programmed recording, your
video recorder needs to know:
* the date you want to make the recording
* the programme number of the TV channel
* the start and stop time of the recording
This information is saved in a 'TIMER' block.
Programming a recording
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
. The main menu will appear.
MENU
3.
3.
Select 'TIMER' with
Then press
FWD 1- B
4.
4.
Select 'ONCE', 'DAILY' or 'WEEKLY' recording
with
or
PLAY B-K
STOP C-L
.
FWD
1- B
SELECT K L CHOOSE B
ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
Selecting once/daily/weekly recordings
'ONCE': Recording once
'DAILY': Repeated daily recordings from
Monday to Friday
'WEEKLY.': Repeated weekly recordings (every
week on the same day)
Error message : 'FULL'
• If this error message appears after you select
'ONCE', 'DAILY' or 'WEEKLY' on TIMER menu
and press
FWD
1- B
are already programmed. No more recordings
can be programmed. If you want to clear or
check a programmed recording(TIMER block),
select the programme number on TIMER LIST
menu and press
CLEAR
5.
5.
Select TIMER block with
6.
6.
Enter the Start time (START), End time
(STOP), Programme number (PROG.) and
the 'DATE' with
0..9
Programme numbers of the 'TV' scart socket
You can also programme recordings from exter-
nal sources via scart socket 'TV'. Select pro-
gramme number, 'A/V IN' with 0.0.
or
PLAY B-K
STOP C-L
.
. Then press
, then all TIMER blocks
.
.
0..9
.
7.
7.
When all inputs are correct, press
STATUS/EXIT
is stored in a TIMER block.
8.
8.
Insert a cassette with an intact security tab
(unprotected).
9.
9.
Switch off with
The programmed recording will only function
when the video recorder is switched off with
STANDBY/ON y y
How to check, or delete a pro-
grammed recording (TIMER)
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
MENU
3.
3.
Select 'TIMER' with
Then press
4.
4.
Select 'TIMER LIST' with
.
and confirm with
SELECT K L CHOOSE B
END=EXIT
5.
5.
Select timer block with
Timer block disappeared when I pressed
.
FWD 1- B
You have checked all the programmed record-
ings. If you want to check them again, repeat
steps 2 to 5.
6.
6.
To cancel the recording, press
7.
7.
To end, press
8.
8.
Switch off with
11
. The programming information
.
STANDBY/ON y y
.
. The main menu will appear.
or
PLAY B-K
.
FWD 1- B
PLAY B-K
.
FWD 1- B
ONCE
DAILY
WEEKLY
TIMER LIST
FWD
1- B
CLEAR
STATUS/EXIT
.
STANDBY/ON y y
.
.
STOP C-L
or
,
STOP C-L
.
.
EN
Advertisement
Table of Contents
