Soot And Fly Ash - Harman Stove Company P61A-2 Owner's Manual

Clean-out plate
7. Open burn pot clean-out as shown to the left,
clean fly ash from bum pot and replace cover.
8. Clean heat exchanger with scraper as shown in fig
25.
9. Brush or scrape the inside of the stove to remove
fly ash.
- - -
10. Scrape burnpot with flat end of scraper provided
Fig. 28 Fig. 29
with the stove. Fig. 33.
Latch "closed "with Latch "open "with blower
blower cover in place. cover partly removed.
11 .Slide ash pan into stove and latch into place.
Bum pot clean-out is Bum pot clean-out is
closed. open.
ESP probe
stores.
Fig. 32
Soot and
Fly Ash
C
Fig. 30
The products of combustion will contain small
Exposed blower wheel Blower cover
particles of fly ash. The fly ash will collect in
and flue opening, removed.
the exhaust venting system andrestrict the flow
NOTE: ESP probe is
of the flue gases. Incomplete combustion,
visible.
such as occurs during startup, shutdown, or
incorrect operation of the room heater, will
Be careful not to
damage ESPprobe
when cleaning with
brush.
Fig. 31
21 P61A-2 Pellet Stove
lead to some soot formation which will
collect in the exhaust venting system. The
exhaust venting system should be in-
spected at least once every year to de-
termine if cleaning is necessary.