Radio mode
"SENS HI6" means that the tuner is set to
the highest sensitivity setting. "SENS LO1"
means it is set to the lowest sensitivity set-
ting.
u
Set the desired sensitivity level using
buttons 6.
the
When you have fi nished making your chang-
es,
u
press the MENU button :.
Note:
You can set different sensitivity levels
for FM and MW or LW (AM).
Storing stations
Storing stations manually
u
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
u
Tune into the desired station.
u
Press and hold down one of the station
buttons 1 - 5 < for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the fi ve sta-
tions offering the strongest reception in the
region (FM only). The stations are stored in
the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
u
Press and hold down the BND/TS ?
for longer than two seconds.
40
The storing procedure begins. "FM TSTORE"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored in memory location 1 of
the FMT memory bank.
Listening to stored stations
u
Select the memory bank or waveband.
Press the station button 1 - 5 < of the
u
desired station.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time from 5 to 30 seconds in the
menu (in increments of 5 seconds).
Starting SCAN
u
Press and hold down the MENU button
: for longer than two seconds.
Scanning begins. "SCAN" appears briefl y
on the display followed by a fl ashing display
of the current station name or frequency.
Cancelling SCAN and continuing
listening to a station
Press the MENU button :.
u
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
Press the MENU button :.
u
u
Press the
or
edly until "SCAN TIME" appears on the
display.
u
Set the desired scanning time using the
buttons 6.
button 6 repeat-