Storing Stations; Storing Stations Automatically (Travelstore); Listening To Stored Stations; Scanning Receivable Stations (Scan) - Blaupunkt London MP48 Operating And Installation Instructions

Hide thumbs Also See for London MP48:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Radio mode
u
Press the
or
until "SENS HI" or "SENS LO" appears
on the display.
u
Press the button
low (LOW) or high (HIGH) sensitivity.
When you have fi nished making your chang-
es,
u
press the ESCAPE button <.
Note:
The device stores the sensitivity value
set in the respective FM and AM wave-
band.

Storing stations

Storing stations manually
u
Select the desired memory bank FM1,
FM2, FMT or the AM waveband.
u
Tune into the desired station.
u
Press and hold down one of the station
buttons 1 - 5 9 for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the fi ve strong-
est stations in the region. The stations are
stored in the previously selected FMT or AM
memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
14
button 4 repeatedly
4 to adjust a
or
u
Press and hold down the BND button
= for longer than two seconds.
The storing procedure begins. The display
shows "FM TSTORE" or "AM TSTORE". After
the process has completed, the radio will
play the station that is stored in memory
location 1.

Listening to stored stations

u
Select the memory bank or waveband.
u
Press one of the station buttons 1 - 5
9.
The stored station is played if it can be
received.
Scanning receivable stations
(SCAN)
You can use the scan function to play all
the receivable stations briefl y. You can set
the scanning time in the menu to between
5 and 30 seconds.
Starting SCAN
u
Press and hold down the MENU•OK
button 5 for longer than two sec-
onds.
The radio scans the next receivable station.
"SCAN" and the current frequency are inter-
mittently shown on the display.
Cancelling the SCAN and continuing to
listen to a station
u
Press the MENU•OK button 5.
Scanning stops and the radio continues
playing the station that it tuned into last.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents