Table of Contents
Advertisement
Manually Override Time
For testing purpose, you may also override the time setting.
Note: This time value will be lost at power down, or overwritten if NTP is currently
active. Time and date are used only for logging purposes and are not typically
required.
Advanced Settings Tab – Provisioning
Note: It is recommended that Provisioning Mode be set to Disabled if this feature is not
in use. This will prevent unauthorized re-configuration of the device if DHCP is used.
Provisioning allows installers to pre-configure 8190S SIP Classroom Speaker with Strobe
units prior to installation on a network. It is typically used for large deployments to save
time and ensure consistent setups.
Document 90-00105
03/09/2020
Page 40
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8190S SIP Classroom Speaker with Strobe FW 3.1
support@algosolutions.com
(604) 454-3792
Advertisement
Table of Contents
