Advanced Settings Tab - Advanced Audio - Algo 8190S User Manual

8. File algop8190s.conf can now be uploaded onto the Provisioning server
If using a generic configuration file, extensions and credentials have to be entered
manually once the 8190S SIP Classroom Speaker with Strobe has automatically
downloaded the configuration file.
Generating a specific configuration file
1. Follow steps 1 to 6 as listed in the section "Generating a generic configuration file".
2. Rename file settings.txt to algom[MAC address].conf (e.g.
algom0022EE020009.conf)
3. File algom[MAC address].conf can now be uploaded on the Provisioning server.
The specific configuration file will only be downloaded by the 8190S with the MAC address
specified in the configuration file name. Since all the necessary settings can be included in
this file, the 8190S will be ready to work immediately after the configuration file is
downloaded. The MAC address of each 8190S unit can be found on the back label of the
unit.
For more Algo SIP endpoint provisioning information, see:
www.algosolutions.com/provision
Advanced Settings Tab – Advanced Audio
Dynamic Range Compression (DRC)
If enabled, compresses the dynamic range of page audio to increase loudness.
Document 90-00105
03/09/2020
Page 42
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8190S SIP Classroom Speaker with Strobe FW 3.1
support@algosolutions.com
(604) 454-3792