Advanced Settings Tab - Provisioning - Algo 8188 Installation/Configuration Manual

Advanced Settings Tab – Provisioning
Provisioning allows installers to pre-configure 8188 Ceiling Speaker
units prior to installation on a network. It is typically used for large
deployments to save time and ensure consistent setups.
There are two different Provisioning methods that can be used: via
DHCP Option 66 or via a Static Server. In addition, there are three
different ways to download provisioning files from a "Provisioning
Server": TFTP (Trivial File Transfer Protocol), FTP, or HTTP.
For example, 8188 Ceiling Speaker configuration files can be
automatically downloaded from a TFTP server using DHCP Option
66. This option code (when set) supplies a TFTP boot server
address to the DHCP client to boot from.
DHCP must be enabled if using DHCP Option 66, in order for
Provisioning to work.
Document 90-00067 A
2014-09-12
Page 31
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com