Advertisement
8.2 Instructions:
a) Arming Tab should be attached to the shorter end of the cord with a figure of 8 knot. Pull
tight to hide the knot inside the tab like this:
b) Fit the activation cap to the beacon – note this will switch on the beacon, so once fitted
press and hold the 'off' button to switch off the beacon.
c) Function testing of the auto switch:
d) Remove the activation cap and ensure the beacon switches on automatically, switch off the
beacon as above.
e) Replace activation cap and switch off beacon.
f) Fit the arming tab to the cap.
Orolia Ltd, Silver Point, Airport Service Rd, Portsmouth, Hants, PO3 5PB, United Kingdom
Tel: +44 (0) 23 9262 3900 Fax: +44 (0) 23 9262 3998 Email:
Figure of eight
knot
service.uk@mcmurdogroup.com
Page | 9
Advertisement
