Advertisement
2. DISASSEMBLY
2.1:
Remove the activation cap. The beacon will activate. Switch off the beacon by
pushing and holding the 'Off' button – the beacon should switch off after
approximately 3 seconds.
NOTE: Do not allow beacon to operate for longer than 15 seconds.
2.2:
Remove LED cap by removing 2 off Screws.
2.3:
Remove the battery. The PCB & foil insert do not need to be removed.
Note: The battery should be disposed of in a sensible and considerate manner, and
in accordance with local regulations. Also the LED cap and gasket are not reusable
and should be disposed of.
Orolia Ltd, Silver Point, Airport Service Rd, Portsmouth, Hants, PO3 5PB, United Kingdom
Tel: +44 (0) 23 9262 3900 Fax: +44 (0) 23 9262 3998 Email:
service.uk@mcmurdogroup.com
Page | 3
Advertisement
