Advertisement
3. ASSEMBLY
3.1:
Ensure the Foam Pad to the bottom of the cell pack.
3.2 :
Ensure the replacement Sealing Gasket is fitted to the replacement LED cap
assembly. Note: Ensure the gasket is seated correctly or product may fail the leak test.
3.3:
Ensure the PCB assembly is seated correctly.
Orolia Ltd, Silver Point, Airport Service Rd, Portsmouth, Hants, PO3 5PB, United Kingdom
Tel: +44 (0) 23 9262 3900 Fax: +44 (0) 23 9262 3998 Email:
service.uk@mcmurdogroup.com
Page | 4
Advertisement
