SoundTraxx Tsunami TSU-KT1000 Application Note

Digital sound decoder for kato f40ph

Application Note

Overview

This application note describes how to install a Tsunami

TSU-KT1000 Digital Sound Decoder into the HO Kato F40PH.

Skill Level 1: The entire installation can be completed in less

than an hour with no modiﬁ cation required to the model.

Stock No.

Description

828064

TSU-KT1000 for the F40PH

810054

1" Speaker

I Miniature screwdriver set

I Wire Strippers

I Miniature Pair of Pliers

I 25W Soldering Iron

I Rosin Core Solder

I Tweezers

Kato F40PH

Tsunami Digital Sound Decoder Installation Notes

Table of Contents

Do you have a question about the Tsunami TSU-KT1000 and is the answer not in the manual?

Page 1 ® Application Note Kato F40PH Tsunami Digital Sound Decoder Installation Notes Overview This application note describes how to install a Tsunami TSU-KT1000 Digital Sound Decoder into the HO Kato F40PH. Skill Level 1: The entire installation can be completed in less than an hour with no modiﬁ...
Page 2 Installation Next, remove the 2 screws holding the light board in place with a Phillips head screwdriver. Set aside in a safe place – you will need them Start by removing the body shell according to later. (Photo 3) instructions included with model. (Photo 1) Photo 3 Photo 1 Remove the light board.
Page 3 (Photo 8) disconnected from the train or at the end of the run. Photo 8 New Dimensions in Digital Sound Technology 141 Burnett Drive Durango, CO 81301 (970) 259-0690 Fax: (970) 259-0691 Email: Sales@soundtraxx.com ©2010 Throttle Up! Corp. All Rights Reserved...